Stirrer Accessories
Chemglass Life Sciences Vortexing Marine Style Impeller Blade for 15L Bio Reactors used with 15mm Shaft
Marine style impeller blades are available in two styles, Vortexing and Scoping. The 3 through 7 liter sizes fit the 8mm shaft of the agitator assembly, while the 15 liter size fits the 15mm Shaft size. CLS-1385-36 and CLS-1385-37 are for use with CLS-1385-35 agitator assembly. These blades are used primarily for mammalian cell culture work. Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Bellco Glass, Inc. MicroCarrier Impeller Assembly , 1-3L
Micro-Carrier ImpellerAssemblyPromote optimal growth of suspension andmicro-carrier cultures. Impeller height adjuststhrough compression fitting in cap. Indentedbottom up to 1L prevents accumulation ofmicro-carrier beads under impeller. Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. MADE IN THE USA. Impeller size: 1-3l Paddle dimensions: 1 3/4" x 4 1/4" Consist of: Magnet holder: a523-207 Silicone plug: a523-200
Arrow Engineering Type 316 Stainless Steel VPP Series Propeller 4-1/4"dia. 3 Blade
The Arrow Mixing Products Type 316 Stainless Steel VPP Series 4-1/4″dia. 3 blade propeller with 5/16-24 tapped hole. Our stainless propeller selection is engineered for optimal performance, ensuring smooth and consistent mixing for various industries, including pharmaceuticals, food processing, and chemical production. With a carefully crafted design, these propellers maximize power and efficiency, helping you achieve the best results for your mixing needs.
Chemglass Life Sciences Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint
Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint. PTFE stirrer bearing with a hose connection for vacuum or inert gas source on a single neck flask. Grease-free design has only glass and PTFE in contact with the reaction, and can be used under moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint size, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. Saddle o-ring provides vacuum tight seal and is replaceable at a fraction of the cost of the entire bearing. Hose connection is 10mm at the largest serration. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 120mm Dia, Fits Shaft Size 10mm, 45° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 120mm Dia, Fits Shaft Size 10mm, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Cole-Parmer 316 Stainless Steel Pitched-blade Propeller, 2.5" dia x 5/16" bore dia
Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
Ace Glass, Inc. Paddle style replacement blade, PTFE, 102mm, fits 19mm agitators 8091-10, -20
102MM PADDLE STYLE BLADE ONLY
Ace Glass, Inc. Stir blade, stainless, 24x160mm, 10mm shaft
24X160mm 304 SS stir blades for 10mm O.D. button type stir shafts. For compatible stir shafts see ACE 8068, 8070, 8074, and 8075 series.
Bellco Glass, Inc. Over Head Drive Adj Paddle, 8-36L
Over head drive adjustable paddle 8-36l MADE IN THE USA.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 12000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 12000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences Stirrer Blade, PTFE, 19mm, Heavy Duty, for 12000mL Flasks, 39mm Width x 150mm Length, 45/50 minimum joint clearance
Stirrer Blade, PTFE, 19mm, Heavy Duty, for 12000mL Flasks, 39mm Width x 150mm Length, 45/50 minimum joint clearance. Stirrer blade made of 3/16" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 19mm OD.